ARIETE ECO POWER 6422 Mode D'emploi page 12

have been slightly lubricated.
• During use, rest the appliance onto a horizontal surface.
• Never leave the appliance unattended when it is connected to the power supply.
• When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
• Before leaving the iron unattended, even for a short time, turn off the appliance,
always unplug it and place it on support base (E).
• Pressing the steam button before the boiler has reached the optimum tempera-
ture or the iron has heated up may cause water to leak from the steam holes.
• Do not use the appliance if the power cord appears to be damaged, with parts
bearing burns, etc.; an authorised Ariete service centre must repair and replace
the power cable; under penalty of the warranty being forfeited.
• Never try to iron garments being worn.
• Do not touch the metal parts of the iron when in operation and for several minutes
after it is turned off since it could cause burns.
• Do not aim the jet of steam towards parts of the body or pets.
• Place the appliance on a stable surface where it can not tip over.
• Place the appliance on a work surface that bears a temperature of at least 90°C.
Do not place on delicate surfaces.
• Remove any labels and protections from the soleplate before using the appliance
for the first time.
• Always unwind the power cord before use.
• Using the appliance with no water in the tank may damage the pump.
• Do not use sparkling (carbonated) water. If your water supply is very hard, we
suggest you use demineralised water instead.
• When the iron is hot, do not rest it onto the connecting cable or the power cord.
Take special care in ensuring that the cable and the cord do not come into contact
with the soleplate when it is hot.
• Do not pull the power cord to unplug the appliance.
• The appliance must only be cleaned with a soft, slightly damped, cloth after un-
plugging the iron and allowing all its parts to cool down. Never use solvents which
may damage the plastic parts.
• Do not pour vinegar, descalers or other scented substances into the tank; Other-
wise, the warranty may be revoked.
• Do not wrap the power cord around the soleplate when the iron is hot.
• Do not put the soleplate in contact with metal surfaces.
• Put the thermostat knob (I) on MIN before storing the appliance. Always unplug the
power cord from the socket. Wait for it to cool down and completely empty the tank.
12
Warning of burns
Warning – material damage