Uline H-2378 Mode D'emploi page 2

CHANGING PARTS
REPLACING HEATING ELEMENT WIRE
PAGE 2 OF 9
OPERATING INSTRUCTIONS CONTINUED
Plastic
Cover
Spring
REMOVE PLUG FROM OUTLET BEFORE INSTALLATION
1. Remove plastic cover from front post.
2. Remove Teflon tape.
®
3. Remove screw attaching heating element to post,
located under plastic cap.
4. Remove heating element.
5. Remove rear top cover plate to expose rear post.
6. Attach new heating element to front post with screw.
7. Feed heating element through channel.
8. Use flat head screwdriver to compress spring on rear post.
9. Attach heating element to rear post.
10. Replace top cover.
11. Replace plastic cover on front post.
12. Place new Teflon
®
Screw
Teflon Tape
Screw
Washer
Post
tape over sealing wire.
Heating
Element
0521 IH-2378