Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
1.
Using the dimension drawings on page 3, determine the
desired location for the mirror. Take into account you
should have a 3 inch minimum clearance between the
bottom of the mirror and the top of the faucet/vanity.
Use the main body (B) to mark the screw locations on
the wall.
Note: 1. Make sure it is level.
2. The installation location has to have power
outlet inside of main body (B) as shown
2.
Secure the main body (B) to the wall using screws (AA)
or the hardware best suited for your wall type. Refer to
Mounting Options on page 5. Be careful to not drill into
hidden electrical or plumbing lines inside the wall when
mounting main body (B) to wall.
Hardware Used
AA
Wall Mount Screw
BB
Drywall Anchor
3.
With the help of another adult, hold mirror (A) away
from the main body (B), connect the DC plug(1), then
plug the power cord into the wall outlet (2). Secure
power cord to avoid contact with sharp objects.
1
2
AA
x 4
AA
x 4
3
6
B
B
AA
AA
AA
2
A
B
BB
Publicité
