Rm-X211 Remote Commander; Radio - Sony CDX-DAB500U Mode D'emploi


(BACK)/MODE button
page 8, 10, 15
Press to return to the previous display;
select the radio band (DAB/FM/MW/
LW).
Press and hold to enter/cancel the
passenger control (iPod).
 Front panel release button page 5

(BROWSE) button page 9, 16
To enter the Quick-BrowZer™ mode
(DAB/CD/USB).
 AF (Alternative Frequencies)/
TA (Traffic Announcement)/
PTY (Program Type) button page 10
To set AF and TA (press); select PTY
during DAB or FM reception (press and
hold).
 Number buttons

Radio:

To receive stored DAB services or radio
stations (press); store DAB services or
radio stations (press and hold).
CD/USB:
/: ALBUM / (during MP3/
WMA/AAC playback)
To skip an album (press); skip
albums continuously (press and
hold).
:
(Repeat)* page 15
: SHUF page 15
: PAUSE
To pause playback. Press again to
resume playback.
 DSPL (Display)/SCRL (Scroll) button
page 10, 12, 13, 14
To change display items (press); scroll a
display item (press and hold).
 AUX input jack page 23
* This button has a tactile dot.
Note
If the unit is turned off and the display
disappears, it cannot be operated with the remote
commander unless  on the unit
is pressed, or a disc is inserted to activate the unit
first.
RM-X211 Remote
commander
Remove the insulation film before use.
 OFF button
To turn off the power; stop the source.
 SOURCE button
Press to turn on the power.
Press repeatedly to change to another
source (Radio/CD/USB/AUX).
  ()/ () buttons
To control Radio/CD/USB, the same as
 –/+ on the unit.
Setup items can be operated by  .

(BACK) button
To return to the previous display.
 ENTER button
To apply a setting.
 PTY (Program Type) button
 VOL (Volume) +*/– button
7