Publicité
Les langues disponibles
Les langues disponibles
D.
Then you will see these messages,
Please choose:
1. Generate AHCI Driver diskette for Windows2000/XP
2. Generate RAID Driver diskette for Windows2000/XP
3. Generate AHCI Driver diskette for WindowsXP64
4. Generate RAID Driver diskette for WindowsXP64
5. Exit
Reboot system now
Press any key to continue
Please insert a floppy diskette into the floppy drive. Select your required
item on the list according to the mode you choose and the OS you install.
Then press any key.
E.
The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
STEP 3: Install Windows
After making a SATA / SATAII driver diskette, you can start to install Windows
/ XP 64-bit on your system. At the beginning of Windows
third-party AHCI driver. When prompted, insert the SATA / SATAII driver diskette contain-
®
ing the NVIDIA
AHCI driver. After reading the floppy disk, the driver will be presented.
Select the driver to install according to the OS you install. The
drivers are as below:
A. NVIDIA nForce Storage Controller (required) Windows XP/2000
B. NVIDIA nForce Storage Controller (required) Windows XP64
Please select A for Windows
XP 64-bit in AHCI mode.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Install Windows
2 6
2 6
2 6
2 6
2 6
ASRock
®
2000 / XP / XP 64-bit OS on your system.
®
2000 / XP in AHCI mode. Please select B for Windows
Advanced screen
®
2000 / XP / XP 64-bit OS on your system.
939N68PV-GLAN
Motherboard
®
2000 / XP
®
setup, press F6 to install a
IDE Configuration.
®
Publicité
