Safety Instructions - Tectro TD 1010 Manuel D'utilisation

Masquer les pouces Voir aussi pour TD 1010:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
4
46
man_TD1010 ('16).indd 46

SAFETY INSTRUCTIONS

Read this user manual carefully before using the
appliance and keep it for future reference. Install
this device only when it complies with local/
national legislation, ordinances and standards.
This product is intended to be used as a dehumidi-
fier in residential houses and is only suitable for
use in dry locations, in normal household condi-
tions, indoors in living room, kitchen and garage.
This unit is only suitable for earthed sockets, con-
nection voltage 220-240 V. / ~50 Hz.
GENERAL
• To obtain optimum performance from your
dehumidifier, do not place it near a radiator or
any other heat source.
• Ensure that all windows are closed in order to
achieve maximum efficiency.
• The capacity of the dehumidifier depends on
the temperature and the humidity in the room.
At lower temperatures, less moisture will be
removed.
• Ensure that the screen filter is kept clean. This
prevents unnecessary power consumption and
guarantees optimum efficiency.
• If the power supply has been interrupted, the
dehumidifier will restart after three minutes.
The automatic delay protects the compressor.
IMPORTANT
The device MUST always have an earthed
connection. If the power supply is not
earthed, you may not connect the unit. The
plug must always be easily accessible when
the unit is connected. Read these instructions
carefully and follow the instructions.
17-05-16 14:58

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières