Cleaning And Maintenance; Safety Information - CASO DESIGN BMCG25 Mode D'emploi Original


Setting the quantity / weight
Select the quantity/weight you require by pressing the
displayed (100g-1800g). Defrost time is set automatically.

Starting automatic defrost
After setting the defrost quantity, press the button
► Stop the oven occasionally to remove the unthawed frozen food or to separate it. If the
frozen food has not been defrosted at the end of the estimated defrosting time,
proceed as follows:
► Program the oven in 100g increments, until the frozen food is completely defrosted.
► When using plastic containers out of the deep-freeze, the defrosting process should
only last long enough to be able to remove the frozen food out of the container, after
which it can be placed into a microwave-resistant container.

14 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

14.1 Safety information

Attention
Please observe the following safety notices, before you commence with cleaning the
device:
► The oven must be cleaned and food residues must be removed at regular intervals. If
the oven is not maintained in a clean condition, this will have a detrimental effect on
the service life of the device and can also result in a dangerous condition in the device
as well as in the growth of fungus and bacteria.
► Switch the oven off prior to cleaning it and unplug the plug from the wall power outlet.
► The cooking chamber is hot after it is used. There is a danger of burns! Wait until the
device has cooled down.
► Clean the cooking chamber after use as soon as it has cooled down. Extended waiting
unnecessarily complicates cleaning and can make it impossible in extreme cases.
Excessive accumulations of dirt can even damage the device under certain
circumstances.
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
Please note
button until the weight will be
, to start automatic defrosting.
66