1
Press (DSPL) (PTY) during FM
reception until "PTY" appears.
The current programme type name appears if
the station is transmitting the PTY data.
"- - - - - - - -" appears if the received station is
not an RDS station, or if the RDS data is not
received.
2
Press M or m repeatedly until the
desired programme type appears.
The programme types appear in the order
shown in the table.
"NO Data" appears if the programme type is
not specified in the RDS data.
3
Press (ENTER).
The unit starts searching for a station
broadcasting the selected programme type.
22
Setting the clock
automatically
— CT (Clock Time)
The CT data from the RDS transmission sets the
clock automatically.
1
During radio reception, press (MENU),
then press M or m repeatedly until "CT-
off" appears.
2
Press , repeatedly until "CT-on"
appears.
The clock is set.
3
Press (ENTER) to return to the normal
display.
To cancel the CT function, select "CT-off" in
step 2.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.