Maintenance/Care - Warn 83340 Instructions D'installation

WARNING
FAILURE TO SECURELY TIGHTEN ALL BOLTS
ON THE BUMPER CAN RESULT IN PRODUCT
FAILURE WHICH MAY RESULT IN VEHICLE
DAMAGE AND OPERATOR INJURY OR DEATH.
DOUBLE CHECK THAT ALL BOLTS ARE SE-
CURELY TIGHTENED PRIOR TO USE.
VII. MAINTENANCE/CARE
1. Inspect all parts on the bumper and related hardware prior to each use. Replace all hardware that
appears rusted or deformed.
2. Inspect all nuts and bolts on the bumper, and related hardware prior to each use. Tighten all nuts that
appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
PERFORM REGULAR INSPECTIONS ON THE BUMPER AND RELATED HARDWARE. FAILURE TO
FOLLOW THIS WARNING MAY CAUSE VEHICLE DAMAGE AND OPERATOR INJURY OR DEATH.
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
WARNING
PAGE 9 83624A0