Warn 83340 Instructions D'installation page 5

4. Using the two bolts you just removed in Figure 3,
mount the new frame bracket as shown in Figure
4. Do not tighten at this time.
5. Attach the the skid plate using the provided
four M10 bolts 25mm long , and M10 lock nuts.
Shown In Figure 5.
6. Attach the bottom of the skid plate using the
Provided M10 bolts 30mm long hex head bolts,
7/16 flat washers, and the M10 lock nuts. Shown
in Figure 6
Tighten all fasteners at this time.
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
PAGE 5
Figure 4
Figure 5
Figure 6
83624A0