Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V. INSTALLATION
1. Remove grill using a T27 Tourqes driver as
shown in Figure 1.
2. Remove the three lower 10mm bolts in the
bottom of the skid plate as shown in Figure 2.
3. Remove the top two bolts shown in Figure 3
using a 15mm wrench, retain these bolts as they
will be used in the mounting of the new kit.
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
PAGE 4
Figure 1
Figure 2
Figure 3
83624A0
Publicité
Table des Matières
