TREND T18S/BJ Traduction Des Instructions Originales page 5

EN – T18S/BJ
Thank you for purchasing this Trend product, we hope
you enjoy many years of creative and productive use.
Please remember to return your guarantee card within 28
days of purchase.
TECHNICAL DATA
Voltage VDC 18
Battery type Li-Ion
Blade size mm 100
Bore size mm 22
Blade thickness mm 4
Spindle thread mm M10 x 1.25
No load speed min-1 8,500
Cutting depth max. mm 20
Tilt base angle deg 0-90
Vertical fence adjustment mm 35
Weight kg 2.5
Battery*
Capacity of the battery Ah 2
Ah 4
Ah 5
Charger*
Input voltage V~ 220 - 240
Mains frequency Hz 50/60
Rated power W 60
Output voltage VDC 21
Output current A 6
Charge time T18S/BA2A** min 32
Charge time T18S/BA4AM** min 48
Charge time T18S/BA5A** min 54
* only for models equipped with
battery and charger
** charging time applies only to the
battery with a capacity listed in tabl
Noise values and vibration values (triax vector sum) according to
EN60745-2-19
EN - T18S/BJ
dB(A) 74
Emission sound pressure level L
pA
dB(A) 85
Sound power level L
WA
dB(A) 3
K (uncertainty for the given sound
pA
pressure)
Vibration emission Value ah = m/s 2 1.732
Uncertainty K = m/s 2
K=1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance
with a standardised test given in EN60745 and may be
used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
WARNING: The declared vibration emission
level represents the main application of the tool.
However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration
emission may differ.
This may significantly increase the exposure level over
the total working period. An estimation of the level of
exposure to vibration should also take into account the
times when the tool is switched off or when it is running
but not actually doing the job. This may significantly
reduce the exposure level over the total working
period. Identify additional safety measures to protect
the operator from the side effects of vibration such as:
maintain the tool and the accessories, keep hands warm,
organisation of work patterns.
EC DECLARATION OF CONFORMITY
MACHINERY DIRECTIVE
CORDLESS BISCUIT JOINTER
T18S/BJ
Trend declares that the product described under
Technical Data is in compliance with 2006/42/EC, EN
60745-1:2010, EN 60745-2-19:2009+A1:2010.
These products also comply with Directive 2014/30/EU
and 2011/65/EU.
For more information please contact Trend at the
following address or refer to back of manual. The
undersigned make this declaration on behalf of Trend
Tool Technology Ltd.
-8-
Neil McMillan
Technical Director
Technical File Contact
Trend Tool Technology Ltd
Trend Tool Technology Ltd
Odhams Trading Estate,
3rd Floor, Kilmore House,
Watford, WD24 7TR,
Park Lane,Spencer Dock,
England
Dublin 1, Ireland
01/08/2021
UK DECLARATION OF
CONFORMITY
The undersigned, representing the following
manufacturer
Manufacturer:
Trend Tool Technology Ltd, Watford, England WD24 7TR
declares that the product(s):
Product Identification:
Product: Cordless Biscuit Jointer
Brand: Trend
Model: T18S/BJ
Conforms to the following UK Regulations
• The Supply of Machinery (Safety) Regulations, 2008,
S.I. 2008/1597 (as amended).
• Electromagnetic Compatibility Regulations, 2016, S.I.
2016/1901 (as amended).
• The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations 2012, S.I. 2012/3032 (as amended).
and the following Designated Standards:
S.I. 2008/1597: EN 60745-1:2010
EN 60745-2-19:2009+A1:2010
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Trend Tool Technology Ltd.
Neil McMillan
Technical Director
Trend Tool Technology Ltd,
Odhams Trading Estate,
Watford, WD24 7TR,
England
01/08/2021
WARNING: To reduce the risk of injury, read
the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
EN - T18S/BJ
DANGER:
Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
CAUTION:
Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related
to personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term "power tool" in the warnings refers to your
mains- operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work Area Safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you to
lose control.
-9-