Oreck sanapathic XL DMS2000 Mode D'emploi page 4

IMPORTANT SAFETY INSTRUCTIONS
CAREFULLY READ THESE OPERATING INSTRUCTIONS BEFORE USING THIS PRODUCT
Precautions and Warnings
READ ALL INSTRUCTIONS CAREFULLY.
1. Use product for its intended use only. This product is for household use only.
2. CAUTION: To protect against a risk of electric shock, do not immerse in water or other liquids.
3. The unit should always be turned OFF before plugging or unplugging from outlet. Never pull cord
to disconnect from outlet; instead grasp plug and pull to disconnect.
4. Do not operate unit with a damaged cord or if it has been dropped or damaged. To avoid the risk
of electrical shock, do not disassemble; take it to an authorized Oreck service center for examination
and repair. Incorrect reassembly can cause a risk of electrical shock. The manufacturer is not to
be held responsible for any damages caused by improper use of appliance.
5. Close supervision is necessary when using appliance near children. Do not leave unattended while
unit is plugged. Do not leave the appliance for more than 15 minutes without using it.
6. Burns can occur from touching hot metal parts, hot water or steam.
7. All repair work should be done by an authorized Oreck service center.
8. Empty water from unit and allow unit to cool before storing.
9. The appliance must only be used for cleaning and/or humidifying environments suited to being
treated with a jet of steam.
10. Make sure that the objects, surfaces and places to be treated are resistant and compatible with the
high temperatures of steam before starting to work.
11. User must work under safe conditions, avoiding any situation which is potentially dangerous to
themselves or to others.
12. Steam jets can be dangerous if they are used improperly. In particular, never turn the jet toward
people, animals, outlets or electrical appliances.
13. Do not use the appliance on leather, furniture, parquet, synthetic fabrics, silk, velvet or other steam
sensitive surfaces. If in doubt, test a part of the object to be cleaned where it cannot be seen.
SPECIAL INSTRUCTIONS
1. To avoid circuit overload, do not operate high wattage appliances on the same circuit.
2. If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords rated for
less amperage may overheat. Care should be taken to prevent tripping over the cord.
Always unplug from electrical outlet after use and before cleaning. In case the appliance does not
operate correctly, turn it off immediately. Avoid repairing it yourself. For repairs, consult an authorized
Oreck dealer and require that original spare parts are used. The lack of conformity to the above might
endanger the safety of this appliance and will invalidate eventual warranty. In case you decide to
discontinue using this appliance, cut the electrical cord, after unplugging it from the electrical outlet,
and to dispose of it and the appliance properly. Never leave the appliance nor its parts in the reach of
children, who could use them as toys. Keep all packaging (plastic bags, polystyrene, staples, etc.) out
of the reach of children.
All manuals and user guides at all-guides.com
SPECIFIC WARNINGS
The installation of this appliance must follow the instructions of the manufacturer. An incorrect installation
could cause damage to people, animals or things, against which Oreck cannot be held responsible.
To reduce the risk of electrical shock, this appliance has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not
modify the plug in any way.
Ensure that the rating and of the outlets corresponds to the maximum power indicated on the nameplate.
In case of doubt, refer to qualified personnel. To avoid dangerous overheating of the appliance, we
reccommend unrolling the electrical cord completely. Do not leave the appliance plugged while not in
use. Do not obstruct the ventilation/dissipation slots. Keep adequate space between walls, objects,
etc.
SAVE THESE INSTRUCTIONS
IMPORTANT: UPON THE FIRST HOUR OF USE OF YOUR SANAPATHIC VAPOR MACHINE, WATER
COULD LEAK OUT OF THE APPLIANCE TOGETHER WITH STEAM. THIS HELPS ELIMINATE ALL
RESIDUES AND IMPURITIES ACCUMULATED IN THE STEAM CHAMBER DURING MANUFACTURING
AND WILL DISAPPEAR AFTER THE FIRST HOUR OF USE.
Water and its minerals vary widely by geographic location. If you live in a hard water area, to insure
optimum performance of your Sanapathic™ Vapor Machine, it is strongly recommended to use distilled
water, which is readily available in retail stores.