Venga VG RVC 3001 Mode D'emploi page 8

D. Activate the robot
Place the robot onto the charging
dock, making sure the metal charging
contacts on the charging dock
match up with those underneath the
robot. If successful, you will hear a
series of tones. Once the power
button illuminates, the Venga! robot is
ready for use.
E. Start cleaning cycle
Press the power button
wake up the robot.
Press the power button
start a cleaning cycle (or press the
"Auto" button on the remote control).
If its battery gets low before finishing a
cleaning cycle, the robot will
automatically return to the charging
dock.
lf the charging dock is inaccessible,
the robot will return to its starting
location and the cycle will end.
In this case, please place the robot on
its dock manually.
F. Pause
To pause the robot, press the
button or press the
remote control.
To resume the cleaning cycle, press
the button again.
To send robot back to the charging
dock, press the
G. Power off
To end the cleaning cycle and put
your robot in standby mode, press
and hold the button until the
robot's indicator light turns off.
VG RVC 3001
once to
again to
button on the
button.
8