Maintenance Intervals; Replacement Parts/Accessories - Deltafox DG-PLM 5125 SP Traduction De La Notice D'utilisation Originale

GB

Maintenance intervals

Regularly carry out the maintenance work listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting
performance and avoids accidents.
Table maintenance intervals
Maintenance Work
(See "cleaning and mainte-
nance")
Check and tighten screws,
nuts and bolts
Check the engine oil level /
petrol level and refill with en-
gine oil / petrol if required
Clean operating elements /
the area around the silencer
Clean the finger protection
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Check the silencer and spark
catcher
b
Clean the air cooling system
Clean more often if there is a high level of dust or heavy dirt
a

Replacement parts/accessories

Spare parts and accessories can be obtained at
If you have any other questions, contact the "Service-Center" (see „Service-Center").
118
Before


a
a,
www.grizzlytools-service.eu
After
After
1
st
Work
Hrs.


After After
5
8 Hrs. 50 Hrs.






Annual




