Micromaxx MD 15803 Mode D'emploi page 27

Malfunction
The appliance is
not working.
The temperature is
not low enough.
The appliance
is operating too
loudly or vibrating.
The LED display
is off.
The operating el-
ements do not
work.
The interior light-
ing is not working.
28 of 74
Cause
The electrical circuit
has been interrupted.
The door does not
seal properly when
closed or has been
opened too often.
The appliance is dirty.
The appliance has
been set up in a loca-
tion that is exposed
to direct sunlight or
next to a heat source.
The feet on the appli-
ance have not been
properly adjusted.
The fan is blocked.
The power supply
has been interrupted.
The control system
has failed.
The temperature sen-
sor is defective.
The LED is defective.
Rectification
• Check whether the mains plug
is plugged in.
• Check whether the mains
socket is live by plugging in
another electrical device (e.g. a
bedside lamp).
• Check whether the connection
cable has been damaged.
• Arrange the bottles so that
they do not prevent the door
closing properly.
• Open the door for a short peri-
od of time.
• Check the door seal.
• Clean the appliance.
• Set up the appliance in anoth-
er location.
• Set the appliance to a colder
setting.
• Adjust the feet on the appli-
ance.
• Check the fan.
• Check the plug.
• Contact the customer service
department.
• Contact the customer service
department.
• Contact the customer service
department.