TECHNICAL SPECIFICATIONS
MILLENIA
Design
5-driver, 2-way bass-reflex includes powered drives and
passive radiators in an ultra-thin high-gloss enclosure
Crossover
2nd-order electro-acoustic at 2.6 kHz
High-Frequency Driver
One 25-mm (1 in) S-PAL
Bass/Midrange Drivers
Two 114-mm (4-1/2 in) anodized unibody cones, 37-mm
(1-1/2 in) high-temperature aluminum voice coils, Nomex
spider, Nitrile-Butadiene rubber surround, neodymium
magnet, integrated moving magnet/motor heat dissipation
system, tempered steel heatfin basket
Passive Radiators
Two 114-mm (4-1/2 in) anodized unibody cones, nitrile-
butadiene rubber surround, precision-tuned resonance system
Low-Frequency Extension
:
75 Hz (DIN)
*
Frequency Response:
On-Axis
±3 dB from 120 Hz – 21 kHz
30
Off-Axis
±3 dB from 120 Hz – 15 kHz
º
Sensitivity – Room/Anechoic
92 dB / 89 dB
Suitable Amplifier Power Range
15 – 130 watts
Maximum Input Power
†
70 watts
Impedance
Compatible with 8 ohms
Dimensions (h x w x d)
64.0 cm x 16.5 cm x 4.4 cm /
25-1/5 in x 6-1/2 in x 1-3/4 in
Weight (unpacked)
3.0 kg / 6.5 lb each
Finish
Black Gloss / Brushed Aluminum
* DIN 45 500. Indicates -3 dB in a typical listening room.
10
LP 2
™
dome, ferro-fluid damped/cooled
™
†
With typical program source provided the amplifier clips no more than 10% of the time.
Design
Crossover
High-Frequency Driver
Bass/Midrange Drivers
®
Passive Radiators
Low-Frequency Extension
Frequency Response:
On-Axis
30
Off-Axis
º
Sensitivity – Room/Anechoic
Suitable Amplifier Power Range
Maximum Input Power
Impedance
Dimensions (h x w x d)
Weight (unpacked)
Finish
* DIN 45 500. Indicates -3 dB in a typical listening room.
MILLENIA
LP XL
™
7-driver, 2-way bass-reflex includes powered drivers and
passive radiators in an ultra-thin high-gloss enclosure
2nd-order electro-acoustic at 2.6 kHz
One 25-mm (1 in) S-PAL
dome, ferro-fluid damped/cooled
™
Two 114-mm (4-1/2 in) anodized unibody cones, 37-mm
(1-1/2 in) high-temperature aluminum voice coils, Nomex
spider, Nitrile-Butadiene rubber surround, neodymium magnet,
integrated moving magnet/motor heat dissipation system,
tempered steel heatfin basket
Four 114-mm (4-1/2 in) anodized unibody cones, nitrile-
butadiene rubber surround, precision-tuned resonance system
:
60 Hz (DIN)
*
±3 dB from 120 Hz – 21 kHz
±3 dB from 120 Hz – 15 kHz
92 dB / 89 dB
15 – 130 watts
†
70 watts
Compatible with 8 ohms
86.0 cm x 16.5 cm x 4.4 cm /
33-3/4 in x 6-3/4 in x 1-3/4 in
4.1 kg / 9 lb each
Black Gloss / Brushed Aluminum
†
With typical program source provided the amplifier clips no more than 10% of the time.
®
11