Omron SpotArm i-Q142 Mode D'emploi page 23

HEM-1040-E.book 23 ページ ２０１１年１２月２０日 火曜日 午後１時４３分
To cancel a measurement
If you press the O/I or START/STOP button while the cuff is inflating,
measurement stops and the arm cuff deflates.
Note: For safety reasons, measurement will stop if any button is
pressed. (Except Arm cuff release button
Important:
If inflation does not stop when the O/I, START/STOP or
any other button is pressed,
Press the Emergency deflation switch on the back of the unit.
Emergency
deflation switch
3. Using the Unit
)
EN
23