Table des Matières
Publicité
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
(2) 10 mm Wrenches
(2) 13 mm Wrenches
(1) 20 mm Socket with Ratchet and Extension
(1) Needle Nose Pliers
(1) Grease Gun
ASSEMBLE THE TRAILER FRAME
STEP 1:
(SEE FIGURE 1).
• Starting with the frame upside down secure the sides
of the front trailer frame (1) to the sides of the rear
trailer frame (2) using two M6x50 mm bolts (K), M6
steel washers (C), and M6 locknuts (F).
• Attach the bottom of the rear trailer frame (2) to
the bottom of the front trailer frame (1) using two
M6x65 mm bolts (J), M6 steel washers (C), and M6
locknuts (F).
1
2
C
J
K
C
F
FIGURE 1
ATTACH THE AXLE MOUNTING PLATES
STEP 2:
(SEE FIGURE 2)
• Attach the top of the two axle mounting plates (4)
to the trailer frame assembly with four M6x40 mm
bolts (M), M6 steel washers (C), and M6 locknuts (F).
• Secure the bottom of the axle mounting plates (4)
using four M6x50 mm bolts (K), M6 steel washers (C),
and M6 locknuts (F).
4
K
M
ASSEMBLE THE HITCH
STEP 3:
(SEE FIGURE 3)
• Place the rear tongue tube (7) into the U bracket on
the axle tube (5) and secure with one M8x70 mm
bolt (H), M8 steel washer (B), and M8 locknut (E).
• Secure the latch tube assembly (10) to the top of the
rear tongue tube (7) using two M8x100 mm bolts (G),
M8 steel washers (B), and M8 locknuts (E).
• Insert the latch tube assembly (10) and the front
tongue tube (12) into the connector pocket (11)
and secure with two M8x60 mm bolts (I), M8 steel
washers (B), and M8 locknuts (E).
I
11
12
5
C
F
M
G
B
10
B
7
B
E
K
FIGURE 2
H
5
E
FIGURE 3
Publicité
Table des Matières
