Delete All Memory Addresses - Data Function; Print Function - Gossen MetraWatt GEOHM C Mode D'emploi

6.3.3 Delete All Memory Addresses – Data Function
Up to 250 data records can be stored to memory. The memory is full
when the triangle to the right of the "MEMORY:" parameter is entirely filled in.
The entire memory, i.e. all data records from all memory addresses, can
be deleted at once. We recommend uploading and saving your data to a
PC before deletion.
Ð
Press the Data key.
Ð
Enter memory address "000". A security request appears after
acknowledgement with the START key (press at center).
28
Ð
3x
If the message shown above appears when the test instrument is
switched on, you are provided with the opportunity of uploading and
saving all data to a PC before deleting the memory in order to correct the
error.
6.4
Functions whose symbols appear in gray or which are displayed faintly,
will not be available until after the next software update.
+
Acknowledge by simultaneously pressing O and K to delete all data
from memory. The indicator to the right of the "MEMORY:" parameter
appears empty. Memory address "001" is displayed at the left. New
data can now be entered for this address, or the database can be
exited (press ↵ or START 9 times).

Print Function

+
GMC-I Messtechnik GmbH