GeoMax Zenith25 Serie Guide Rapide page 6

Function button

All functions described assume the Zenith25 is already on.
Button
Function
Instrument Components
Function
Press and hold button for <1 s.
Switches the Zenith25 between rover or base mode.
Press and hold button for 3 s.
Updates the base position coordinates when Zenith25
is in base mode. The RTK base LED flashes for 2 s.
When no position is available, the LED flashes red.
Press and hold button for 5 s.
Connects to the configured RTK base station or NTRIP
server when the Zenith25 is in rover mode. The RTK
rover LED flashes for 2 s. No action if a rover mode is
not configured.
Zenith25 | 5