Publicité
TO CHANGE THE NOZZLE
NOTE: ALL nozzle changes must
be done once the pen has reached
its correct operating temperature.
In order to reach this, turn on the
pen and wait for the light above the
power button to go blue. The pen
is then ready for the nozzle to be
changed.
The Polaroid FAST Play 3D Pen
comes with 3 different size nozzles to allow you to create your models
faster or with different design techniques. To change the nozzle simply
place the pen into the empty nozzle slot in the holder. Then turn the
pen anti-clockwise to release the current nozzle. Remember, the pen
MUST be at its correct operating temperature in order to do this.
Once the nozzle has been released it will stay within the holder to allow
you to move the pen onto the next nozzle. To affix a new nozzle simply
place the pen into the part of the holder where the nozzle is that you
want to attach. Turn the pen clockwise to screw the new nozzle tight
into place. Remember, the pen MUST be at its correct operating
temperature in order to do this.
When your new nozzle is in place, please select the correct setting for
that specific nozzle before using the pen.
To change this setting, click the round yellow button in the middle of the
pen until the correct orange light is lit to correspond with the nozzle on
the pen. The symbols marked on the pen will show you which nozzle
setting is currently selected.
POUR CHANGER LA BUSE
REMARQUE: Tous les changes de la buse doivent être effectué
lorsque le stylet a REACHED la température d'opération. Pour ce faire,
14
Publicité
