Inakustik NF-A1 Mode D'emploi page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation
NF-A1
6. Connection
The devices may only be connected to the mains voltage which is
indicated on the devices!
Improper handling of the mains voltage may cause fatal injuries! The
interconnect cables are not to be connected to the mains. The RCA
plugs of the interconnect cables may only be connected with the
corresponding in- / output terminals of the equipment.
Connecting the interconnect cables directly to the mains is not
permitted under any circumstances! This is fatally dangerous and
leads to the immediate destruction of the product.
All cables must be positioned in such a way that there is no danger of
them being damaged (e.g. by being stepped on, furniture or so-called
"spikes" under the loudspeakers). Never remove cables by pulling the
cable; instead, always hold the plug itself when removing.
When the devices are in stand-by mode, they are not completely
separated from the mains, as is indicated on the LED. In order to
avoid unnecessary risks and energy consumption, the mains switch
on the back of the device should be switched off during extended
absences.
The mains plug and the on/off switch for the devices should be easily
accessible.
7. Interconnect cable connection
The interconnect cable may only be connected with the corresponding
in- / output terminals of the equipment. Any type of direct connection
to the mains presents a fatal danger and leads to the almost
immediate destruction of the devices. For this reason, interconnect
cables may not be provided with plugs which may be mistaken for
mains plugs.
Never touch non-insulated cable ends or connection contacts during
operation.
8. Overload
In the case of extreme overload, it is possible for individual
components to burn-through, despite multiple fuses. It is also
theoretically possible (though we are not familiar of such a case
actually happening) that such overload could cause a fire to start in
the interior of the device. Therefore, you should not leave the devices
unattended when operating an at extremely high level.
19

Publicité

Table des Matières
loading

Produits Connexes pour Inakustik NF-A1

Table des Matières