Publicité
Les langues disponibles
Les langues disponibles
Reading Too High?
If the black disk is outside of the box on the "MAX" side and you
have connected your hose to the skimmer, reduce the vacuum/
water flow by using one of the following:
•
Suction valve(s) in the filter system (if equipped with)
•
Hayward regulator valve
To install the Hayward regulator valve:
1.
Remove the hose from the skimmer cone adapter.
2.
Close the regulator valve by rotating the blue collar clockwise
until tight.
3.
Insert the regulator valve onto the skimmer cone adapter and the
hose end into the regulator valve.
4.
Turn the filter system on and allow it to evacuate any air in
the system.
5.
Turn the blue collar clockwise until black disk appears between
"MIN" and "MAX" markings.
TO MAIN DRAIN
(if applicable)
REGULATOR
VALVE
CONE ADAPTER
TO PUMP
9
Publicité
