Hayward ABOVE GROUND Serie Manuel D'utilisation page 12

IMPORTANT TIPS
Periodically check the water flow/vacuum to be sure that your
Remember, too much vacuum is just as bad as too little.
Periodically check to make sure that the cleaner hose is securely
attached to its suction source (i.e. skimmer, wall connector, etc.).
Disconnect the cleaner hose from the suction source prior to
"backwashing", to prevent water flow restriction.
DO NOT COIL HOSE
When storing your cleaner, the hose sections must be stored
straight. A coiled hose will create a memory in the hose that will
impede the cleaner's ability to move properly.
Coiled hoses are not covered under the Hayward warranty.
Adjust the water return toward the center of the pool so
water circulation does not interfere with the cleaner's pool
coverage capability.
Use only original Hayward spare parts and hoses to ensure
proper operation.
12