Tripp-Lite DWM1327SE Manuel Du Propriétaire page 6

2. Attach the Display to the VESA Plate
Using an assistant or mechanical lifting equipment, lift the display and align the rear mounting holes with the
mount's VESA plate. Attach the display to the VESA plate with the appropriate included screws.
Firmly secure all screws. Do not over-tighten.
3. Adjustment
To correct the tilting angle, tighten the adjustment screw using the provided Hex Key.
14-03-248-93332B.indb 6
TV
6
M4X14
M5X14
5mm Hex Key
4/11/2014 2:47:23 PM