Craftmade Beckham BEK54 Guide D'installation page 6

5. Fan Assembly. (cont.)
With the hanging bracket secured to the
safety cable loop
wood
outlet box and able to support the fan, you are
ceiling
now ready to hang your fan. Grab the fan
joist
firmly with two hands. Slide downrod through
opening in hanging bracket and let hanging
wood screw
ball rest on the hanging bracket. Turn the
and washer
hanging ball slot until it lines up with the
hanging bracket tab.
safety cable
WARNING: Failure to align slot in hanging ball
hanging bracket tab
with tab in hanging bracket may result in
serious injury or death.
hanging ball slot
Tip: Seek the help of another person to hold
the stepladder in place and to help lift the fan
up to you once you are set on the ladder.
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
motor housing
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. If
necessary, adjust the loop at the end of the
safety cable. The loop at the end of the safety
cable should just fit over the threads on the
wood screw. Test safety cable by pulling on
loose end with pliers. If the safety cable slips, the
loop must be adjusted tighter. Extra cable slack
can be left in ceiling area.
page 6