AUTO-HAK J46 Instructions De Montage page 5

Towing hitch accessories:
Towing hitch (without electrical set)
Cat. no. J46
Class: A50-X
Designed for:
Manufacturer: HYUNDAI
GETZ
Model:
Type: 3/5 doors
produced since 09.2002 till 08.2005
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 0898
This towing hitch is designed according to rules of safety traffic regulations. The
towing hitch is a safety component and must be installed only by qualified
personnel. Any alteration or conversion to the towinh hitch is prohibited and would
lead to cancellation of design certification. Remove insulating compound and
underseal from vehicle (if present) in the area of the matting surfaces of the towing
hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch must not be
exceeded.
D-value formula:
Max trailer weight [kg] x Max vehicle weight [kg]
+ Max vehicle weight [kg]
Max trailer weight [kg]
PPUH AUTO-HAK S. J.
Produkcja Haków Holowniczych
Henryk i Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www.autohak.com.pl
Technical data:
D-value: 6,70 kN
maximum trailer weight: 1100 kg
maximum vertical cup load: 50 kg
Foreword
9,81
X =
1000
D [kN]