LOUISE
SMART Comfort
Quax
Quax
First dreams
®
®
First steps
3. Parts list and assembing the bathing cabinet
Check whether all parts mentioned below are included in the packaging.
3.1 Assembling the towel support
Push both woodscrews Q in the provided openings of the frontal part E and slightly fasten them in the parts H.
Insert the piece I in the special openings on both parts H. Now tighten the screws Q.
3.2 Assembling the structure
Insert the cylindrical nuts O in the provided openings at the bottom of parts E and assemble them with the leg-
frames D as shown in the upper detail drawing by inserting and fastening the bolts P through the drillings of the
frames. Repeat this action with the parts G. (Attention : do not fully tighten the joints).
3.3 Inserting the shelves
Slide the shelves F diagonally across the sliders and with the stoppers underneath the sliders following the lower
detail picture.
3.4 Installing the wheels
Insert the adapters for the wheels in the provided openings of the legs and push the wheels W into place.
3.5 Installing the bathtub
Push the bathtub S on the structure formed by parts D and E. Now tighten the bolts P on all joints.
22
Kinderpark met verstelbare bodem
01 02 43XX
05 05 19xx
Laufgitter mit verstelbarer Boden
O
: 12 x Cylindrical nut
P
: 12 x Bolt M6*60 mm
Q
: 2 x Wood screw 7*50 mm
R
: 1 x Hexagonal key
S
: 1 x Bathtub in white pvc
Bad- en luiermeubel
Baignoire et table à langer
Parc enfant avec fond réglable
Wickel- und Bademöbel
Bath and diaper cabinet
Playpen with adjustable bottom
W
: 2 x Wheel with brake and two without.