2.
Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
3.
Place the throttle grip in the "
(start) position.
4.
Pull the manual starter handle slowly un-
til you feel resistance. Then give a strong
pull straight out to crank and start the en-
gine.
N
ZMU07884
ZMU07885
TIP:
If the engine does not start, place the throt-
tle grip in the "
position and try again.
It is not necessary to use the choke when
"
starting a warm engine.
5.
After the engine starts, slowly return the
manual starter handle to its original posi-
tion before releasing it.
6.
Slowly return the throttle grip to the fully
closed position.
Operation
" (warm engine)
ZMU02030
43