13. Specifications
Thermometer with direct sensor output with Pt100 (model TR21-x-ZPx) and
Pt1000 (model TR21-x-ZRx)
Temperature range
Model TR21-A
■
Model TR21-B
■
Model TR21-C
■
Measuring element
Temperature at the connector
Connection method
Tolerance value of the measuring
element per IEC 60751
Response time per IEC 60751
Electrical connection
Autoclavability (option)
For detailed specifications for Pt sensors, see Technical information IN 00.17 at www.wika.com.
Case
Material
Ingress protection
Case with connected connector
■
8) 9)
Coupler connector, not connected
■
Weight in kg
Readings in % refer to the measuring span
6) Through their small design, face-sensitive measuring resistors serve to reduce the heat dissipation with short insertion
lengths. Available for the temperature range up to 150 °C (302 °F).
For thermowell insertion lengths of less than 50 mm, face-sensitive measuring resistors are recommended.
For thermowell insertion lengths of less than 11 mm, face-sensitive measuring resistors are generally used.
7) Class accuracy AA only valid in the temperature range 0 ...150 °C (32 ... 302 °F)
8) The stated ingress protections only apply when plugged in using line connectors that have the appropriate ingress
protection.
9) Not tested at UL
WIKA operating instructions model TR21
-30 ... +250 °C (-22 ... +482 °F)
-30 ... +150 °C (-22 ... +302 °F)
-30 ... +150 °C (-22 ... +302 °F), -30 ... +250 °C (-22 ... +482 °F)
Pt100 (measuring current: 0.1 ... 1.0 mA)
■
Face-sensitive Pt100 (measuring current 0.1 ... 1.0 mA)
■
Pt1000 (measuring current: 0.1 ... 0.3 mA)
■
Face-sensitive Pt1000 (measuring current 0.1 ... 0.3 mA)
■
max. 85 °C (185 °F)
3-wire
■
4-wire
■
Class AA
7)
■
Class A
■
t
< 4.7 s
t
< 12.15 s
50
90
M12 x 1 cirucular connector (4-pin)
Autoclavable with mounted protection cap at the coupler
connector (for further information see "Ambient conditions")
Stainless steel
IP67 and IP69 per IEC/EN 60529, IP69K per ISO 20653
IP67 per IEC/EN 60529
approx. 0.3 ... 2.5 (depending on version)
EN
6)
6)
27