Brandson Equipment 303396 Mode D'emploi page 7

User Manual
5. Product details
6. Initial use
Take the device out of the package and
check the device as well as the scope of
delivery. Please contact the vendor if any
part is missing or has been damaged. In-
stall the wind machine to a suitable place
and connect it to a properly installed 220-
240V AC grounded outlet. By loosening
the tilt angle nut and tilting the protec-
tive cage, you can change the tilt angle as
desired. Tighten the nut again when you
have reached the desired tilt.
Tilt angle nut
- EQUIPMENT -
Protective
cage
Rotor blade
Axis for
inclination
angle
Pedestal
bracket
Tilt button
7. Usage
You can select between three different
speed levels using the rotary switch on
the rear of the device.
Speed level
OFF
LOW
MEDIUM
HIGH
8. Cleaning
Pull out the power plug from the socket
before starting with the cleaning process!
Use a slightly moist cloth for cleaning
(wetted with water).
For cleaning, never immerse the device
into water! This could lead to electric
shock or fire!
CAUTION!
9. Safety instructions and liability dis-
claimer
Never try to open the device to carry out
repairs or conversions. Avoid contact with
mains voltages. Do not short-circuit the
product. The device is not certified for use
in the open air; only use it in dry condi-
tions. Protect it from high humidity, water
and snow. Keep it away from high tem-
peratures. Do not subject the device to
sudden changes in temperature or heavy
vibration as this might damage electronic
Off
Slow
Medium
Fast
3