SilverCrest SDBS 2400 A1 Mode D'emploi page 17

Vertical steam ironing
1) Hang the fabric to be ironed on a clothes hanger which is hung against
a heat-resistant surface.
2) Rotate the temperature control
The temperature control
steam.
3) Wait until the heat-up indicator lamp
4) Press the steam strength button
–
If the "max" steam indicator lamp
produced.
–
If the "eco" indicator lamp
As soon as the "eco"
(depending on the setting) you can start steam ironing.
5) Hold the steam iron in a vertical position and press the steam button
6) Touch the fabric lightly with the sole of the iron
creases.
7) Release the steam button
Refilling with water
You can refill the appliance with water while it is switched on.
1) Put the iron down on the base station placement area
2) Refill the water tank as described in the section "Filling the water tank".
│ GB │ IE │ NI
■ 14
All manuals and user guides at all-guides.com
must be set to a minimum of
or "max"
to stop producing steam.
to set the required ironing temperature.
goes out.
to set the required steam strength:
is lit up, a lot of steam will be
is lit up, less steam will be produced.
indicator lamps light up continuously
and steam it to remove
.
SDBS 2400 A1
to produce
.