Installng Memory Modules
1.
Unlock the DIMM slot by pushng the mountng clps to the sde. Vertcally nsert the
memory module nto the DIMM slot. The memory module has an off-center notch on
the bottom that wll only allow t to fit one way nto the DIMM slot.
2.
Push the memory module deep nto the DIMM slot. The plastc clps at each sde
of the DIMM slot wll automatcally close when the memory module s properly seat
and an audble clck should be heard.
3.
Manually check f the memory module has been locked n place by the DIMM slot's
sde clps.
Notch
Volt
En-15