Grandhall Xenon 3 X3S-VF1 Instructions D'assemblage page 2

ALWAYS CHECK FOR GAS LEAKS EACH TIME
YOU USE YOUR BARBECUE.
You should follow this procedure after any of the following:
Not having used the barbecue for an extended period of time,
Initial assembly of barbecue,
Any disconnection and reconnection of hose assembly,
Changing gas cylinder,
Upon re-connecting gas cylinder after it has been disconnected for storage.
C HECKING FOR GAS LEAKS
NEVER CHECK FOR LEAKS
WITH A FLAME.
Make liquid detergent solution by mixing
one (1) part liquid detergent and four (4)
parts water.
4 parts water
1 part liquid
detergent
Turn burner control knob(s) to OFF then
turn on gas at source.
OFF
IF YOU HAVE A GAS LEAK YOU
CANNOT RECTIFY, TURN OFF
THE GAS AT THE SOURCE.
CONTACT THE SERVICE AGENT
Apply the liquid detergent solution to all visible
and accessible gas connections, including the
connection to the gas cylinder.
appear in the liquid detergent solution if
connections are not properly sealed. Tighten
or rectify as necessary
CHECKING FOR GAS LEAKS
This babecue is approved for use on Natural gas but
must be properly converted from the factory built .
Contact your service agent for details.
Conversion and installation must be by a licensend
plumber or gas fitter and comply with local codes.
2
Bubbles will
.