Optional Accessories - Toyotomi TAD-T38J Mode D'emploi

NOTE: In case of twin duct type, fix the two exhaust duct hose
adapter nozzles.
2. Insert the end of the exhaust duct hoses (I2) into the exhaust
duct hose adapter nozzles (I1) by twisting it clockwise until it
stops.
3. Open the window.
4. Place the window panel in the window, extending it to fit the
width of the window. Once panel is extended, the panel can
be locked into this width by tightening the two (2) screws
(J5) on the top panel.
5. Close the window.
6. Place the exhaust duct hose adapter nozzle (I1) on the ex-
haust duct hose grille (J3).
7. When not in use, the exhaust duct hose adapter nozzle (I1)
may be closed off with the cover (J4) for exhaust duct hose
grille (J3) provided.
NOTE: The same procedure can be adapted for vertical installa-
tion in sliding windows.
Removing Exhaust duct set (Fig. I)
1. Twist the exaust duct hose adapter nozzles (I1)
clockwise to remove the exhaust duct hose
adapter nozzles (I1) from the grooves on the
connector of the unit.(B5 or B9)
2. Pull out the exaust duct hose adapter nozzles from the
grooves on the connector.
3. Twist the exhaust duct hose adapter nozzles (I1) clockwise to
remove the exhaust duct hose adapter nozzles (I1) from the
grooves on the exhaust duct hose grille (J3).
4. Pull out the exhaust duct hose adapter nozzles (I1) from the
grooves on the exhaust duct hose grille (J3).

OPTIONAL ACCESSORIES

When you need a longer size window panel, please purchase
the extension window panel "B" and use it with the original
window panel "C".
Part # 22740286 EXTENSION WINDOW PANEL "B" (M)
31-1/2" (80 cm)
Part # 22740288 EXTENSION WINDOW PANEL "B" (L)
56" (142 cm)
Part # 22740255 AIR OUTLET NOZZLE
5