Onda V-11 Manuel D'utilisation page 32

EN
Start wavelength Scan start wavelength
End wavelength
Step
Speed
Photometry
mode
Y minimum
Y maximum
3. Press the item to select or key in the parameters, press the button Measure to accept the
new parameters and back to measurement interface.
4. Put the reference in the measurement channel, press the icon
5. Put the sample in the measurement channel, press the icon
record the result.
6. Press the icon
Scan end wavelength
Scan interval: 0.1,0.2, 0.5, 1.0,2.0, 5.0,10.0 nm
HS: High speed
MS: Medium speed
LS: Low speed
Abs: absorbance
%T: transmissivity
Minimum ordinate
Maximum ordinate
to browse the curve and result(s).
30
to scan baseline.
to scan a sample and