Trouble Shoot - Oreck AIR94 Mode D'emploi

Trouble
Shoot
Service problems that appear to be major can often be solved
with some troubleshooting. Review the troubleshooting guide
below before contacting a service center.
All other servicing should be done by an Oreck authorized
service center.
Problem
Unit does not
turn ON.
Unit has high
noise level.
Unit still does
not operate
properly.
7
Check
• Power Cord
• Fan speed
• Front Cover
• Filters
Check for a
dirty filter.
Check all the
points above.
Solution
• Plug in Power Cord.
• Set the fan speed to the
desired level.
• Make sure the front
cover is securely
fastened.
• Make sure the unit has
the filters installed
properly.
Replace the filter.
Contact Oreck for service.
See the inside front cover
of this manual for contact
information.