Axis Q1614 Guide D'installation page 11

AXIS Q1614 Network Camera
11. Control button (1)
12. Function button (2)
13. microSD Card slot
14. Audio in
15. Audio out
LED Indicators
LED Color
Net-
Green
work
Amber
Unlit
Status Green
Amber
Red
Power
Green
Amber
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
• The Power LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Network LED can be disabled so that it does not flash when there is network traffic.
To configure, go to Setup > System Options > Ports & Devices > LED. See the online
help for more information.
Indication
Steady for connection to a 100 MBit/s network. Flashes for network
activity.
Steady for connection to a 10 MBit/s network. Flashes for network
activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
11