Royal Sovereign ARP-908 Guide D'utilisation page 11

Climatiseur portable
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT OPERATION
Cooling Operation:
Press the mode icon to switch to cooling mode. The machine will enter boot state, the indicator light will
blink for a few seconds and turn solid when confirmed.
Press the increase or decrease icons to set the desired temperature. The temperature range is from
59-88°F (15-31°C). The digital display will show the current set temperature.
Once the room has reached the desired temperature, the machine will turn off the compressor and run in
fan operation.
Press the wind speed icon to switch between high and low wind speeds.
For optimal operation, shorten the length of the air duct and keep from direct sunlight.
Oscillating Air Vent:
Press the swing icon. The machine will enter boot state, the indicator light will blink for a few seconds
and turn solid when confirmed.
In this mode, the air vent louvers will automatically swing up and down.
Press the swing icon again. The indicator light will turn off when selected and the louvers will stop
swinging.
Dehumidify Mode:
Press the dehumidification icon. The machine will enter boot state, the indicator light will blink for a few
seconds and turn solid when confirmed.
In the dehumidify mode, the fan runs at low speed and the temperature is not adjustable.
Do not use dehumidify mode when the temperature is lower than 59°F (15°C).
Timer:
When the air conditioner is on, press the timer icon and select a desired off (shutdown) time through the
increase and decrease icons (+ / -). The off timer can be set for any time from 0 to 24 hours. Press the
timer icon again to show the preset shutdown time on the control panel display.
When the air conditioner is off, press the timer icon and select a desired on (startup) time through the
increase and decrease icons (+ / -). The on timer can be set for any time from 0 to 24 hours. The control
panel display will show the time remaining until startup.
Once the desired time is selected, wait 3 seconds and the air conditioner will automatically accept the
setting.
11

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Arp-910

Table des Matières