Qilive Q.6710 Manuel D'utilisation page 20

4.4.2 Connecting the Drain Hose
EN
Warning!
• Do not kink or protract the drain hose.
• Position the drain hose properly, otherwise damage might result of water leakage.
There are two ways to place the end of the drain hose:
1. Put it into the water trough.
Water
trough
Note!
If the washing machine has drain hose support, please install it as follows.
Warning!
• When installing the drain hose, fix it properly with a rope or chain.
• If the drain hose is too long, do not force it into the washing machine as it will cause
abnormal noises.
2. Connect it to the branch drain pipe of
the trough.
Trough
Hose Retainer
Max. 100cm
Min. 60cm
20 20