2.10
2.10 Serial A
2.10
Serial A
Serial A
Serial AT T T T T A (SA
A (SAT T T T T A) / Serial A
A (SA
A (SA
2.10
2.10
Serial A
A (SA
Installation
Installation
Installation
Installation
Installation
This motherboard adopts AMD SB700 south bridge chipset that supports Serial
ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 0+1,
RAID 10 and JBOD) functions. You may install SATA / SATAII hard disks on this
motherboard for internal storage devices. This section will guide you to install the
SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0 or RAID 1 function, you need to install at least 2
SATA / SATAII hard disks. If you plan to use RAID 0+1 or RAID 10 function,
you need to install 4 SATA / SATAII hard disks.
2. It is recommended to build RAID on internal SATAII ports. In other words, if
SATAII_6 is used for eSATAII port, please build RAID on other SATAII ports.
2.11
2.11
2.11 Driver Installation Guide
2.11
2.11
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.12
2.12
2.12 Installing Windows
2.12
2.12
Installing Windows
Installing Windows
Installing Windows
Installing Windows
Vista
Vista
64-bit With RAID Functions
64-bit With RAID Functions
Vista
Vista
Vista
64-bit With RAID Functions
64-bit With RAID Functions
64-bit With RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
/ SATAII HDDs with RAID functions, please refer to the document at the following path
in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.13
2.13 Installing Windows
2.13
Installing Windows
Installing Windows
Installing Windows
2.13
2.13
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
®
TM
Windows
Vista
64-bit OS on your SATA / SATAII HDDs and eSATAII devices
without RAID functions, please follow below procedures according to the OS you
install.
ASRock
A) / Serial A
A) / Serial AT T T T T AII (SA
A) / Serial A
AII (SA
AII (SAT T T T T AII) Hard Disks
AII (SA
A) / Serial A
AII (SA
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
®
TM
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
®
®
XP, Windows
XP 64-bit, Windows
A770CrossFire
Motherboard
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
/ / / / /
TM
TM
TM
TM
TM
TM
/ Vista
64-bit on your SATA
/ / / / /
TM
TM
TM
TM
TM
®
TM
Vista
or
2 9
2 9
2 9
2 9
2 9