Variable Speed Control - Felisatti RF67/2200 Consignes De Fonctionnement/Sécurité

2. Variable Speed Control

WARNING: Always unplug the router before
making any speed adjustment.
The Felisatti RF67/2200 is equipped with an
electronic variable speed control feature.
ElectronicVariable Speed Control
This speed control has an infinite number of
speeds from 12000 to 21000 RPM. The speed
is adjusted by turning the speed control knob
(B)- Fig 19. Consult the router bit manufacturer
for recommended bit speed.
Constant Speed
The electronic speed control keeps constant
speed at all levels. If the motor speed decreases
in use you may be exceeding the load capacity
of the tool. This could cause damage to the
motor by overheating. Reducing the depth of cut
so that more passes are required and/or slowing
the rate of feed will reduce the power
requirements on the router.
Soft Start Feature
Electronic feedback control minimizes torque
twist customary in larger routers by limiting the
speed at which motor starts.
Overload Protection
Automatic disconnect in order to keep save the
machine when an overload is produced
Recommended Maximum Speeds for Felisatti router bits
Bit Diameter
RF67/2200 Router Speed Dial Settings
RPM
1"
1-1/4"
2-1/4"
3-1/2"
Dial Settings
Max RPM
24000
18000
16000
12000
17
Fig. 19