TrekStor SurfTab ventos 8.0 Mode D'emploi page 14

QuIcK guIde
b
Thank you for buying the TrekStor SurfTab. We are confident that this
product will be the source of much enjoyment. Please read the following
instructions carefully so that you can become acquainted with the
functions of this product and its use.
Current product information can be found at the TrekStor Website
www.trekstor.de.
Package content
• TrekStor SurfTab
• Micro-USB cable
• USB host adapter
• Power supply (100-240V)
• Cleaning cloth
• Quick guide
1) Controls and connections of the TrekStor SurfTabs
A) Camera: Front side
B) microSD/microSDHC card slot: To insert a microSD/microSDHC memory
card up to 32 GB.
C) Reset: Pressing this button (e. g. with an unfolded paperclip) performs
a reset. Note: A reset only resets the custom settings. Saved data will
remain on the device.
D) Mains input: For connecting the power supply
E) Status LED
F) Mini HDMI™ connector: To connect a HDMI™ device.
G) Micro USB connector: To connect a computer via the micro USB cable.
H) Microphone
I) Audio-out connector: To connect e. g. headphones.
J) Power button: A longer press turns the device on or off. A short press
deactivates/activates the standby mode of the display.
K) Volume control: Press the lower/upper side of the button to lower/raise
the volume. A longer press changes the volume constantly.
L) Camera: Back side
M) Loud speaker: For the output of sound
en
14
) First set up