TREND PH Traduction Des Instructions Originales page 5

PH/JIG/BS
English
12. User must be competent in using woodworking equipment before using our product.
13. Consider working environment before using tools. Ensure working position is comfortable and
component is clamped securely. Keep proper footing and balance at all times.
14. Please see children and visitors away from tools and work area.
15. All tools have a residual risk so must therefore be handled with caution.
If you require further safety advice, technical information, or spare parts, please call Trend Technical
Support or visit www.trend-uk.com
POCKET HOLE CONCEPT
A pocket hole involves clamping one piece of the material to be joined to the jig and boring one or two
counter-bored holes with a special stepped drill. This piece of material is joined to the other piece and
assembled with self-tapping screws. Once driven into the material will provide a strong joint is made.
The screw removes the need for clamping during the gluing process. The component can be handled
whilst the glue is drying. The jig can be adjusted to suit different thicknesses of material, to keep the
screw centred in the workpiece to ensure a good joint.
ITEMS ENCLOSED & DESCRIPTION OF PARTS
A Body
B Drill guide
C Material thickness scale
D Slide adjuster
E Drill depth setting guide
F Clamp pad
G Drill bit
H Screwdriver bit
I Hex key
J Collar
K Self tapping screws
ITEMS REQUIRED
• Drill
• Hand tools
- 4 -