Features; Assembly - Ryobi TEK4 P3200 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Battery ........................................................................4 Volt
Detection Range .............................................. 30 ft. x 110º
Alarm Volume .......................................................... 104 dB
*IP Rating: Specifies the environmental protection the product enclosure provides. An IP Rating of 54 denotes protection against harmful deposits of dust and
protection against water sprayed from all directions. The water resistance rating applies only when the battery cover is installed.
KNOW YOUR MOTION ALARM
See Figure 1, page 10.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
KEYPAD
The digital keypad allows you to set up a custom personal
security code from 4 to 10 digits.
MODE SELECTION
Depending on your application needs, you may choose
between chime mode or alarm mode right after the arming
sequence begins. There is also a separate test mode feature
available to help determine the range of the sensor's view.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

Chime Volume ........................................................... 80 dB
Water/Dust Protection .......................................IP54 rated*
MOTION SENSING
Passive infrared motion sensing alarm helps to deter intruders
or alert you to the presence of others in the area.
MOUNTING OPTIONS
Several different mounting options are available when
positioning the motion alarm. The device can be placed on
a horizontal level surface; screw holes can be used to fasten
the alarm to a vertical surface; or the mounting bracket can
be used to secure the motion alarm in place using rope or
webbing.
REMOTE CONTROL
Convenient remote control allows you to arm and disarm the
motion alarm from a distance of up to 30 ft. The remote is
equipped with a visor clip, or you can remove the clip and
place the remote on a keychain.

ASSEMBLY

PACKING LIST
Motion Alarm
4 Volt Battery
Charger
Remote Control
Button Cell Batteries (2)
Mounting Bracket
Mounting Bracket Screws (2)
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
6 — English