Publicité
- Worn belt
- Clutch slipping
- Mobile pulleys defective sliding
- Jerk or irregular working
- Variator needles are worn or poorly oiled
- The involved parts have not been oiled
- Excessive wear of couplings
- The oil check is not working.
- The flashlights are not working.
- Excessive slack on steering.
- Housing of upper or lower bearings with slack on frame.
- Blocked steering.
- Damaged steering housings.
1 - 10
DEFECTIVE TRANSMISSION
Cause
DEFECTIVE RETURN OF STARTING LEVER
Cause
LIGHTING SET TROUBLES
Cause
DEFECTIVE STEERING
Cause
Remedy
- Replace.
- Check the centrifugal shoes unit, replace if necessary.
- Check the components, replace worn parts, if any, and
oil only with grease.
- Check that counterweights can be moved with one fin-
ger's pressure or that they retract regularly.
- Check that there is no grease on the counterweights.
- Check correct operation of the gaskets.
- Check that the clutch housing pan is not scored.
- Never run the engine without the clutch housing pan.
- Check the components, replace if necessary.
Remedy
- Oil the spring and the sector gear axis with grease.
- Check the starting shaft's capacity.
Remedy
- Check the lighting set.
- Check the voltage regulator.
Remedy
- Upper gasket of steering has loosened, retighten.
- Check and/or replace bearings housings on frame.
- Reset correct driving torque on gasket.
- Replace steering's housings.
Publicité
Chapitres
