Selection Printed Edition - KERN DE6K0.5A Mode D'emploi

7.6 Selection printed edition

printout Using this function data are selected which are to be sent via the
RS232C (not valid for data transfer mode BAPr ).
 In weighing mode keep the PRINT key pressed until [Unit]
 Press the MODE key several times until „LAPr" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired output parameter by pressing the MODE key
 After actuating the SET button, the current state is displayed ( on
 Use MODE and PRINT key to change the status
 Use the SET key to confirm selection. The balance returns to
By that way the user can configurate his own data block, which then
is sent to a printer or to a PC.
30
appears.
Hdr Edition of the headlines
GrS Edition of the total weight
Net Edition of the net weight
tAr Edition of the tare weight
N7E Edition of the stored weight
PCS Edition of quantity
AUJ Edition of the unit weight
Rqt Edition of the reference quantity
FFd Edition of a page feeding at start printer output
FFE Edition of a page feeding at end printer output
/ off ).
„on  off".
weighing mode.
DE-BA-e-1657