Symbols - GreenWorks Commercial GT 160 Mode D'emploi

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
sYmBOL NAmE
Volts
V
Amperes
A
Hertz
Hz
Watts
W
Minutes
min
Alternating Current
Per Minute
/min
Direct Current
No Blade
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Safety Alert
Ricochet
Keep Bystanders Away
DEsIgNATION/EXPLANATION
Voltage
Current
frequency (cycles per second)
Power
Time
Type of current
Revolutions, strokes, surface speed, orbits
etc., per minute.
Type or a characteristic of current
Do not install or use any type of blade on a
product or displaying this symbol.
Do not expose to rain or use in damp locations.
To reduce the risk of injury user must read and
understand operator's manual before using
this product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1 when
operating this equipment.
Precautions that involve your safety.
Thrown objects can ricochet and result in
personal injury or property damage.
Keep all bystanders at least 50 ft. away.
5