Dismantling And Assembling - KREA Swiss sprayBOX Mode D'emploi

CLEANING
Always clean immediately after use. For hygienic cleaning, always use hot water
and a mild food grade detergent. Wipe down the tray and frame with a damp
non-abrasive cloth. The tent material can either be wiped down, washed in the sink or
machine washed at a maximum of 30°C with no spin cycle and then left to dry.
Important: machine spinning & drying, ironing or use of harsh chemicals may cause
damage to the product and invalidate the warranty.

DISMANTLING AND ASSEMBLING

Step 1: Lay the stainless steel container on a stable work surface. Due to its size
and weight, please take care when lifting the tray.
Step 2: Insert the two metal side frames into the four holes and clip the top cross-
frame firmly between them.
3